SnapSkru® Self-Drilling Wall Anchor Kit, Nylon, #6 to #8 Screw Diameter, 100 Pieces
(Pack of
1)
18285 Contains:50 SnapSkru™ Mini Anchors (No. 18284) and 50 No. 6 x 1-1/4" Phillips Pan Head Sheet Metal Screws (No. 98385)
• Anchor locks on wall; hear it “pop” and lock
• Shock- and vibration-resistant
• Installs with a screwdriver or screw gun; no pre-drilling necessary
• Positive stop resists over-turning
• Screw and fixture can be removed, leaving anchor in wall for reuse
• Remove and reinstall anchor in same hole
• For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw “pops” open anchor, locking anchor to wall.
Frequently Bought Together
Light-Medium Duty Anchor Assortment 240Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability
Wallboard Anchor Assortment 1125Pcs
Couldn't load pickup availability
Light-Medium Duty Anchor Assortment 240Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability
Wallboard Anchor Assortment 1125Pcs
Couldn't load pickup availability
Hex Nut Grade 8 Steel M10-1.5
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 40mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 25mm
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability
Product Description
18285 Contains:50 SnapSkru™ Mini Anchors (No. 18284) and 50 No. 6 x 1-1/4" Phillips Pan Head Sheet Metal Screws (No. 98385)• Anchor locks on wall; hear it “pop” and lock
• Shock- and vibration-resistant
• Installs with a screwdriver or screw gun; no pre-drilling necessary
• Positive stop resists over-turning
• Screw and fixture can be removed, leaving anchor in wall for reuse
• Remove and reinstall anchor in same hole
• For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw “pops” open anchor, locking anchor to wall.
Technical Specifications
| Item#: | 18285 |
|---|---|
| Type | Wall Anchors |
| Material | Nylon |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 0.61 lb |
