Trim-Back Flap Disc, Zirconium Grain, Plastic Back, 5/8-11 Arbor, Type 29, 80 Grit, 4-1/2" Diameter
(Pack of
1)
SKU:16551 Item#: 16551
• Unique trimmable backing enables the operator to trim away the back of the disc, exposing more flap abrasive and dramatically extending the life of the disc
• Non-marking backing will not damage the workpiece, resulting in less re-work and scrap
• The Trim-Back allows more flap flexibility – by trimming the backing material away, the flap length is extended enabling the operator to access hard-to-reach areas such as right angles and irregular shapes, and grind on-edge without changing tools
• Zirconium abrasive grain aggressively removes stock while providing excellent finish consistency
Preminum use for all steel materials and welds
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Frequently Bought Together
Spot Weld Remover Drill Bit Cobalt 1/4" (M6.5)
$0.00
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
$0.00
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 2" Maroon
$0.00
Couldn't load pickup availability
2" Green Finger Disc - 50 Grit
$0.00
Couldn't load pickup availability
Scotch-Brite Roloc Clean N Strip Abrasive Disc 4"
$0.00
Couldn't load pickup availability
Twist-On Coating Removal Disc 3" Coarse
$0.00
Couldn't load pickup availability
Flexible Flap Disc 4-1/2"
$0.00
Couldn't load pickup availability
Aluminum Backing Plate Flap Disc 7"
$0.00
Couldn't load pickup availability
Trim-Back Flap Disc 4-1/2"
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
$0.00
Couldn't load pickup availability
1/8" - 1/2 " Cryonitride Spiral Fluted Step Drill - 1/4" Shank
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
Product Description
• Unique trimmable backing enables the operator to trim away the back of the disc, exposing more flap abrasive and dramatically extending the life of the disc• Non-marking backing will not damage the workpiece, resulting in less re-work and scrap
• The Trim-Back allows more flap flexibility – by trimming the backing material away, the flap length is extended enabling the operator to access hard-to-reach areas such as right angles and irregular shapes, and grind on-edge without changing tools
• Zirconium abrasive grain aggressively removes stock while providing excellent finish consistency
Preminum use for all steel materials and welds
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 16551 |
|---|---|
| Type | Trimmable |
| Diameter | 4-1/2 " |
| Wheel Type | 29 |
| Grit | 80 |
| Arbor Size | 5/8-11 " |
| Grain | Zirconium |
| Maximum RPM | 13,000 |
| Backing | Plastic |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191506 |
| TAA Compliant: | Yes |
| Weight: | 0.37 lb |
Product Restrictions
