Turnbuckle, Eye and Eye, Galvanized, 1" x 6"
(Pack of
1)
SKU:1442280 Item#: 1442280
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Turned Eyebolt, Zinc-Plated, 1/2" x 3"
$0.00
Couldn't load pickup availability
Shoulder Eyebolt, Machinery, Self-Colored, M14 x 2.0 x 44.5
$0.00
Couldn't load pickup availability
Unwelded Eye Bolt with Nut, Stainless Steel, 3/8" - 16, 500 lb WLL
$0.00
Couldn't load pickup availability
Shelf Bin, Yellow, 17-7/8" x 6-5/8" x 4"
$0.00
Couldn't load pickup availability
ShelfMaxâ„¢ Bin, Blue, 11-5/8" x 6-5/8" x 6"
$0.00
Couldn't load pickup availability
ShelfMaxâ„¢ Bin, Blue, 11-5/8" x 8-3/8" x 6"
$0.00
Couldn't load pickup availability
Phillips Truss Head Sheet Metal Screw Steel 15mm
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
Fender Lining Screw Grommet Nylon #12
$0.00
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Eye and Eye, 3/8" x 6.00" Take Up
$0.00
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Jaw and Jaw, 3/8" x 6.00" Take Up
$0.00
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 5/8" x 6"
$0.00
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442280 |
|---|---|
| Manufacturer Model #: | 01323 9 |
| Type | Eye and Eye |
| Diameter | 1 " |
| Closed Length | 17 " |
| Working Load Limit | 10,000 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
