Turnbuckle, Eye and Eye, Galvanized, 5/8" x 6"
(Pack of
1)
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Shoulder Eye Bolt with Nut, Stainless Steel, 3/8", 1,000 lb WLL
Couldn't load pickup availability
Eye Bolt with Nut 1/4" x 4" Long
Couldn't load pickup availability
Welded Eye Bolt with Nut, Stainless Steel, 6mm, 400 lb WLL
Couldn't load pickup availability
Wire Rope, Steel, Bare, 7x19, 3/16", 4,200 lbs Breaking Strength
Couldn't load pickup availability
Wire Rope, Steel, Nylon Coated, 7x19, 1/4", 7,000 lbs Breaking Strengt
Couldn't load pickup availability
Wire Rope, Steel, Bare, 7x19, 1/4", 7,000 lbs Breaking Strength
Couldn't load pickup availability
Acrysol Auto Body Degreaser 16oz
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Jaw and Jaw, 3/8" x 6.00" Take Up
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 5/8" x 12"
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 5/8" x 9"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442227 |
|---|---|
| Type | Eye and Eye |
| Diameter | 5/8 " |
| Closed Length | 13-1/2 " |
| Working Load Limit | 3,500 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
