Turnbuckle, Eye and Eye, Galvanized, 5/8" x 9"
(Pack of
1)
SKU:1442134 Item#: 1442134
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Eye Bolt, Lag Screw, 1/4 x 2-3/4"
Couldn't load pickup availability
Unwelded Eye Bolt with Nut, Stainless Steel, 3/8" - 16, 500 lb WLL
Couldn't load pickup availability
Eyebolt, With Nut, Galvanized, 1/2" x 8"
Couldn't load pickup availability
AkroBin®, Yellow, 14-3/4" x 16-1/2" x 7"
Couldn't load pickup availability
ShelfMax™ Bin, Yellow, 17-5/8" x 6-5/8" x 6"
Couldn't load pickup availability
Shelf Bin, Yellow, 11-5/8" x 6-5/8" x 4"
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
Couldn't load pickup availability
High-Tech Seam Sealer Clear 5fl.oz
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 1/2" x 2"
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 1/2" x 12"
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 3/8" x 6"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442134 |
|---|---|
| Type | Eye and Eye |
| Diameter | 5/8 " |
| Closed Length | 17 " |
| Working Load Limit | 3,500 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
