Turnbuckle, Jaw and Eye, Galvanized, 1/2" x 2"
(Pack of
1)
SKU:1442405 Item#: 1442405
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class H
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Eyebolt, Machinery, Self-Colored, 1/4" x 1"
Couldn't load pickup availability
Turned Eyebolt, Zinc-Plated, 1/4" x 2-1/2"
Couldn't load pickup availability
Eyebolt, Machinery, Self-Colored, 5/16" x 1-1/8"
Couldn't load pickup availability
Wire Rope Uncoated 3200 Lb Safe Load 7/16" x 100'
Couldn't load pickup availability
6' Steel Rolling Scaffold
Couldn't load pickup availability
10' Fiberglass Platform Ladder, 300 lbs., Type IA
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Fender Splash Shield Push Rivet Nylon 7mm Hole
Couldn't load pickup availability
Turnbuckle, Jaw and Eye, Galvanized, 1/4" x 4"
Couldn't load pickup availability
Turnbuckle, Hook and Eye, Galvanized, 3/8" x 6"
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Hook and Hook, 1/4" x 3" Take Up
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class H
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442405 |
|---|---|
| Type | Jaw and Eye |
| Diameter | 1/2 " |
| Closed Length | 8-3/4 " |
| Working Load Limit | 2,200 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
