Turnbuckle, Jaw and Eye, Galvanized, 1" x 12"
(Pack of
1)
SKU:1442552 Item#: 1442552
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class H
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Shoulder Eye Bolt with Nut, Stainless Steel, 1/2"-13, 2,150 lb WLL
$0.00
Couldn't load pickup availability
Shoulder Eyebolt, Machinery, Self-Colored, M7 x 1.0 x 28.5
$0.00
Couldn't load pickup availability
Turned Eyebolt, Zinc-Plated, 1/2" x 4"
$0.00
Couldn't load pickup availability
Wire Rope, Steel, Nylon Coated, 7x7, 1/16", 480 lbs Breaking Strength
$0.00
Couldn't load pickup availability
Wire Rope Uncoated 1960 Safe Load 5/16" x 100'
$0.00
Couldn't load pickup availability
20' Aluminum Plank & Stages
$0.00
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
$0.00
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
$0.00
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Hook and Hook, 1/4" x 4.00" Take Up
$0.00
Couldn't load pickup availability
Turnbuckle, Jaw and Eye, Galvanized, 1" x 6"
$0.00
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 1/2" x 6"
$0.00
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class H
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442552 |
|---|---|
| Manufacturer Model #: | 02676 5 |
| Type | Jaw and Eye |
| Diameter | 1 " |
| Closed Length | 25-1/4 " |
| Working Load Limit | 10,000 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
