Turnbuckles Eye and Eye 1/2" x 9" Takeup
(Pack of
2.0)
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Turned Eyebolt, Zinc-Plated, 3/8" x 3-1/2"
Couldn't load pickup availability
Unwelded Eye Bolt with Nut, Stainless Steel, 1/4" - 20, 200 lb WLL
Couldn't load pickup availability
Eye Bolts, Machinery, 1 x 2-1/2"
Couldn't load pickup availability
AkroBin®, Red, 14-3/4" x 16-1/2" x 7"
Couldn't load pickup availability
AkroBin®, Blue, 10-3/4" x 8-1/4" x 7"
Couldn't load pickup availability
ShelfMax™ Bin, Red, 11-5/8" x 6-5/8" x 6"
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-13/16(M8)
Couldn't load pickup availability
Bumper Cover Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 1" x 6"
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 1/2" x 6"
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 7/8" x 12"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 14428 |
|---|---|
| Type | Eye and Eye |
| Diameter | 1/2 " |
| Working Load Limit | 2,200 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
| Weight: | 3.92 lb |
