Home Cutting Tools Wire Thread Insert Repair Kit 3/4-10
Cutting Tools
DV_ZoomOriginal_P_1173.jpg
DV_ZoomOriginal_P_1173.jpg

Wire Thread Insert Repair Kit, 8 Pieces, 3/4-10, 304 Stainless Steel, 200000PSI Tensile Strength
(Pack of 1)

Item#: 53830

Fix-A-Thred®

• Helically-wound thread repair – universally accepted and most cost-effective method of thread repair
• Manufactured from precision cold-formed 18-8 (Type 304) stainless steel
• Kits contain tap, inserts, installation tool, tang removal tool (select kits) and instructions, packaged in a sturdy and convenient storage box
• Inserts compensate for pitch and angle errors and share the load over more of the thread for stronger assemblies
• Tensile strength of at least 200,000 PSI
• Wide effective temperature range: –275°F to +774°F (–170°C to +412°C)
Fix-A-Thred® Insert Installation InstructionsDrill to clear out the damaged thread (if necessary).Thread insert tap supplied. Tap thread should match up with bolt.Wind insert in with light downward pressure until 1/4 to 1/2 turn below surface, driving tang towards bottom of the hole.Remove tool and sit back on top of tang. Tap down sharply. Do not try to twist tang off. For large fine threads, use long nose pliers and pull tang out.
To insure proper installation of inserts, always use the correct and corresponding tools.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Read More
Check Availability

Frequently Bought Together

DV_ZoomOriginal_I_56539.jpg

Scotch-Brite Roloc Bristle Disc 2"

Item#: 56539
DV_ZoomOriginal_P_3141.jpg

Spot Weld Remover Drill Bit HSS 2-3/4" (M8)

Item#: 54455
DV_ZoomOriginal_I_1565710.jpg

Spot Weld Remover Drill Bit

Item#: 1565710
DV_ZoomOriginal_I_P62445.jpg

Fender Bumper Shield Retainer 11/16"

Item#: P62445
DV_ZoomOriginal_I_KT14296.jpg

Fender Splash Shield Push Rivet Nylon 7mm Hole

Item#: KT14296
DV_ZoomOriginal_I_1579409.jpg

Bumper Cover Push-Type Retainer Nylon 18mm

Item#: 1579409
DV_ZoomOriginal_I_LP248.jpg

Thin Wall Locking Thread Repair Insert Kit 10-24

Item#: LP248BL
DV_ZoomOriginal_I_LP247.jpg

HD Locking Thread Insert Kit 5/16-20 to 1/2-20

Item#: LP247BL
DV_ZoomOriginal_P_24473_AP1.jpg

Damaged Screw Remover Extractor #2

Item#: 63213
DV_ZoomOriginal_I_1641220.jpg

21-Piece, 1/4" Shank, 2" Hex Power Bit Set

Item#: 1641220
DV_ZoomOriginal_I_P67476.jpg

Sheet Metal Drill Bit Alloy Steel 1/4"

Item#: P67476
DV_ZoomOriginal_I_DY89310247.jpg

Autobahn Ergo Magna EZ Crimper Ratcheting Terminal Crimper

Item#: DY89310247
DV_ZoomOriginal_P_1173.jpg

Wire Thread Insert Repair Kit M16-1.5

Item#: 53857
DV_ZoomOriginal_P_1173.jpg

Wire Thread Insert Repair Kit 7/8-9

Item#: 53831
DV_ZoomOriginal_P_1173.jpg

Wire Thread Insert Repair Kit 1-14

Item#: 53843

Product Description

• Helically-wound thread repair – universally accepted and most cost-effective method of thread repair
• Manufactured from precision cold-formed 18-8 (Type 304) stainless steel
• Kits contain tap, inserts, installation tool, tang removal tool (select kits) and instructions, packaged in a sturdy and convenient storage box
• Inserts compensate for pitch and angle errors and share the load over more of the thread for stronger assemblies
• Tensile strength of at least 200,000 PSI
• Wide effective temperature range: –275°F to +774°F (–170°C to +412°C)
Fix-A-Thred® Insert Installation InstructionsDrill to clear out the damaged thread (if necessary).Thread insert tap supplied. Tap thread should match up with bolt.Wind insert in with light downward pressure until 1/4 to 1/2 turn below surface, driving tang towards bottom of the hole.Remove tool and sit back on top of tang. Tap down sharply. Do not try to twist tang off. For large fine threads, use long nose pliers and pull tang out.
To insure proper installation of inserts, always use the correct and corresponding tools.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#: 53830
Type Insert Repair Kit
Size 3/4-10
Recommended Drill Size 25/32 "
Number of Pieces 8
UNSPSC #: 27112810
TAA Compliant: Yes
Weight: 1.27 lb

Product Restrictions

Suggested Products

DV_ZoomOriginal_I_P43782.jpg

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Item#: P43782
DV_ZoomOriginal_I_P67286.jpg

Sheet Metal Drill Bit Alloy Steel 1/8"

Item#: P67286
DV_ZoomOriginal_I_P48733.jpg

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Item#: P48733
DV_ZoomOriginal_I_P48732.jpg

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Item#: P48732
DV_ZoomOriginal_I_P67476.jpg

Sheet Metal Drill Bit Alloy Steel 1/4"

Item#: P67476
DV_ZoomOriginal_I_KT13514.jpg

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

Item#: KT13514
DV_ZoomOriginal_I_P67411.jpg

Sheet Metal Drill Bit Alloy Steel 3/16"

Item#: P67411
DV_ZoomOriginal_I_93228.jpg

Abrasive Hand Pad All Purpose 6 x 9"

Item#: 93228
DV_ZoomOriginal_I_P68267.jpg

Twist-On Abrasive Disc 2"

Item#: P68267
DV_ZoomOriginal_I_KT14707.jpg

Spot Weld Remover Drill Bit 5/16" (M8)

Item#: KT14707
DV_ZoomOriginal_I_KT12707.jpg

Abrasive Bristle Wire Belt Steel 23mm

Item#: KT12707
DV_ZoomOriginal_I_56537.jpg

Scotch-Brite Roloc Bristle Disc 2"

Item#: 56537

Your Recently Viewed Items