52 Silver Flux Coated Brazing Rod 1/16"
(Pack of
15.0)
With lower melting temperatures and better capillary action than low silver products, medium silver brazing alloys are excellent for joining copper, stainless steel, bronze alloys and nickel alloys.
Superior Advantages
• Thin-flowing for tight joints, yet fills and bridges gaps
• Strong and ductile
• Very good electrical conductivity
Cadmium-free, flux-coated
Flux Coating Color: YellowTensile Strength: 70,000 PSIMelting Temperature: 1,250°F to 1,410°F (677°C to 766°C)Recommended Flux: 950 (if needed)
Typical Applications
• Electrical rotors, contacts and lugs
• Instrumentation and controls
• Plumbing
• Arts and crafts
• Stainless steel
Usage ProcedureMaterials should be smooth and free of burrs or uneven edges. A carburizing oxyacetylene flame should be used, heating a broad surface along the joint line. Keep the flame cone one inch ahead of the alloy rod and a continuous fillet will form. Clean flux residue off with water.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
53 Pot Metal Bare Brazing Rod 1/16"
Couldn't load pickup availability
40 High Silver Bare Brazing Rod 1/16"
Couldn't load pickup availability
266 Pink Flux Coated Super Fast Flowing Silver Brasing Alloy 3/32x18
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
46 Sil-Phos Bare Brazing Rod 1/8"
Couldn't load pickup availability
45 Silver Bare Brazing Rod 1/8"
Couldn't load pickup availability
43 High Silver Flux Coated Brazing Rod 1/16"
Couldn't load pickup availability
Spring Loaded Trigger Torch Lighter
Couldn't load pickup availability
1/4 on 1/4 Dimension I Single Pass Overlay
Couldn't load pickup availability
1/8 on 1/4 Dimension I Single Pass Overlay
Couldn't load pickup availability
Product Description
With lower melting temperatures and better capillary action than low silver products, medium silver brazing alloys are excellent for joining copper, stainless steel, bronze alloys and nickel alloys.Superior Advantages
• Thin-flowing for tight joints, yet fills and bridges gaps
• Strong and ductile
• Very good electrical conductivity
Cadmium-free, flux-coated
Flux Coating Color: YellowTensile Strength: 70,000 PSIMelting Temperature: 1,250°F to 1,410°F (677°C to 766°C)Recommended Flux: 950 (if needed)
Typical Applications
• Electrical rotors, contacts and lugs
• Instrumentation and controls
• Plumbing
• Arts and crafts
• Stainless steel
Usage ProcedureMaterials should be smooth and free of burrs or uneven edges. A carburizing oxyacetylene flame should be used, heating a broad surface along the joint line. Keep the flame cone one inch ahead of the alloy rod and a continuous fillet will form. Clean flux residue off with water.
Technical Specifications
| Item#: | P14070 |
|---|---|
| Welding Process | Brazing |
| Type | Flux Coating |
| Diameter | 1/16 " |
| Length | 18 " |
| Tensile Strength | 70,000 PSI |
| Melting Temperature | 1250-1410 °F |
| Color | Yellow |
| Base Metal | Silver |
| Silver Content | Medium |
| Recommended Flux | F40 |
| Description | Medium Silver |
| UNSPSC #: | 23271804 |
| TAA Compliant: | Yes |
| Weight: | 2.0 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
