Aligning Reamer, High Speed Steel, Gold Finish, Straight Shank, Right Hand Spiral Flute, 2-7/8" Flute Length, 3/8 x 4"
(Pack of
1)
SKU:86861 Item#: 86861
• Enter holes half their nominal diameter
• Special gold finish minimizes friction
• Three large flats for solid chucking
• Right-hand cut with left-hand flute to minimize pushback or grabbing
NOTE: 3/8" dia. does not have 1/2" shank
NOTE: Always use slow turning drill motors of 4.5A or higher.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Cryocut 9/16" 5-Flute Reamer, 1/2" Shank
$0.00
Couldn't load pickup availability
Cryocut 3/4" 5-Flute Reamer, 1/2" Shank
$0.00
Couldn't load pickup availability
Aligning Reamer HSS 15/16"
$0.00
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
$0.00
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
$0.00
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
$0.00
Couldn't load pickup availability
Aligning Reamer HSS 11/16"
$0.00
Couldn't load pickup availability
Step Reamer Set
$0.00
Couldn't load pickup availability
Taper Pin Reamer HSS 7"
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
$0.00
Couldn't load pickup availability
9" Hi-Level Heavy-Duty Power Jaw Plier-Cutter
$0.00
Couldn't load pickup availability
Spinning Handmaster Driver Set 5Pc Set
$0.00
Couldn't load pickup availability
Universal Socket Set, Metric, 3/8" Drive, 12pc
$0.00
Couldn't load pickup availability
Product Description
• Enter holes half their nominal diameter• Special gold finish minimizes friction
• Three large flats for solid chucking
• Right-hand cut with left-hand flute to minimize pushback or grabbing
NOTE: 3/8" dia. does not have 1/2" shank
NOTE: Always use slow turning drill motors of 4.5A or higher.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 86861 |
|---|---|
| Type | Aligning |
| Material | High Speed Steel |
| Diameter | 3/8 " |
| Decimal Equivalent | 0.3750 " |
| Shank Type | Straight |
| Finish | Gold |
| Shank Size | 1/2 |
| Flats | 3 |
| Flute Type | Right Hand Spiral |
| Flute Length | 2-7/8 " |
| Pilot Drill Diameter | 3/16 |
| Material Thickness | 1 |
| Overall Length | 4 " |
| UNSPSC #: | 23241611 |
| TAA Compliant: | Yes |
| Weight: | 0.1 lb |
