Turnbuckle, Eye and Eye, Galvanized, 1" x 6"
(Pack of
1)
SKU:1442280 Item#: 1442280
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Welded Eye Bolt with Nut, Stainless Steel, 6mm, 400 lb WLL
$0.00
Couldn't load pickup availability
Eyebolt, With Nut, Galvanized, 3/4" x 12"
$0.00
Couldn't load pickup availability
Eye Bolt with Nut 1/4" x 2" Long
$0.00
Couldn't load pickup availability
10ft Fiberglas Step Ladder 7310
$0.00
Couldn't load pickup availability
3ft Fiberglass Step Ladder 7403
$0.00
Couldn't load pickup availability
10ft Fiberglas Step Ladder 6310
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Drive Rivet Nylon M8
$0.00
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 5/8" x 9"
$0.00
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Hook and Eye, 5/16" x 4" Take Up
$0.00
Couldn't load pickup availability
Turnbuckle, Body Only, Galvanized, 1/2" x 2"
$0.00
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442280 |
|---|---|
| Manufacturer Model #: | 01323 9 |
| Type | Eye and Eye |
| Diameter | 1 " |
| Closed Length | 17 " |
| Working Load Limit | 10,000 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
