Turnbuckle, Hook and Eye, Galvanized, 5/8" x 12"
(Pack of
1)
SKU:1442487 Item#: 1442487
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class F
• Apply load to the center of end attachment eyes and bowl of hooks. Do not tip load hooks or side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Eye Bolt with Nut 1/4" x 2" Long
$0.00
Couldn't load pickup availability
Welded Eye Bolt with Nut, Stainless Steel, 1/2" - 13, 1,800 lb WLL
$0.00
Couldn't load pickup availability
Turned Eyebolt, Zinc-Plated, 3/8" x 2"
$0.00
Couldn't load pickup availability
Binding Chain Assembly with Loadbinder
$0.00
Couldn't load pickup availability
Binding Chain Assembly with Loadbinder
$0.00
Couldn't load pickup availability
Binder Chain Assembly, 25', 5/16", Carbon Strength Steel, 4700 lbs Limit
$0.00
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
$0.00
Couldn't load pickup availability
Turnbuckle, Body Only, Galvanized, 1/2" x 2"
$0.00
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 3/4" x 6"
$0.00
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Jaw and Jaw, 5/16" x 4.00" Take Up
$0.00
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class F
• Apply load to the center of end attachment eyes and bowl of hooks. Do not tip load hooks or side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442487 |
|---|---|
| Manufacturer Model #: | 01740 4 |
| Type | Hook and Eye |
| Diameter | 5/8 " |
| Closed Length | 20-5/8 " |
| Working Load Limit | 2,250 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
