172 Intermediate Abrasion And Impact Alloy 5/32X18
(Pack of
5.0)
Produces a very tough martensite deposit that will resist scratching, sliding and gouging abrasion while resisting moderate to heavy impact.
• Tough – Resists cracking, chipping or spalling
• All-Position – Saves time and allows in-position welding
• Super Smooth Welding Arc – Easy to use with a smooth finish
• Economical – Saves money with long lasting overlays
• Multipass overlays
• For use on carbon and abrasion resistant alloy steels including manganese steels
• Generally does not cross-check
• Hardness: 58 Rc
• Machinability: Grind only
• Max Number of Passes: 3
• Current: DCEP (DC+) or AC
• ASTM G65 Abrasion Test: 355.8 mm³ vol. loss
Frequently Bought Together
747 Cobalt Stick Rod Electrode 1/8"
Couldn't load pickup availability
7222 Carbide Hard Facing Stick Rod Electrode 1/4"
Couldn't load pickup availability
7220 Carbide Hard Facing Stick Rod Electrode 1/2"
Couldn't load pickup availability
750 Martensitic Hard Facing Stick Electrode 1/8"
Couldn't load pickup availability
281 Martensitic Stick Rod Electrode 5/32"
Couldn't load pickup availability
172 Latch Bar And Dutchman Hardfacing Alloy 3/16X18
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 10 x 12mm
Couldn't load pickup availability
Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
1/8 on 1/4 Dimension I Single Pass Overlay
Couldn't load pickup availability
201 Rectangular Wear Disc Plate 3 x 6 x 5/32"
Couldn't load pickup availability
Heat Stick 1050F Degrees
Couldn't load pickup availability
Product Description
Produces a very tough martensite deposit that will resist scratching, sliding and gouging abrasion while resisting moderate to heavy impact.• Tough – Resists cracking, chipping or spalling
• All-Position – Saves time and allows in-position welding
• Super Smooth Welding Arc – Easy to use with a smooth finish
• Economical – Saves money with long lasting overlays
• Multipass overlays
• For use on carbon and abrasion resistant alloy steels including manganese steels
• Generally does not cross-check
• Hardness: 58 Rc
• Machinability: Grind only
• Max Number of Passes: 3
• Current: DCEP (DC+) or AC
• ASTM G65 Abrasion Test: 355.8 mm³ vol. loss
Technical Specifications
| Item#: | EG17230000 |
|---|---|
| Welding Process | Stick |
| Type | Electrode |
| Diameter | 5/32 " |
| Base Metal | Steel To Steel |
| Hardness | 58 HRC |
| Polarity | DCEP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 6.39 lb |
