7109 Austenitic Hard Facing MIG Welding Wire, Flux Cored, DCRP Polarity, Quiet and Minimal Sparks, 0.045"
(Pack of 25)

SKU:CW3587 Item#: CW3587

Kent Automotive

Designed for low abrasion resistance and high impact situations.
Superior Advantages
• Work hardens under heavy impact conditions
• Unlimited pass-over-pass applications
• High operator appeal – smooth running, quiet and minimal sparks
Buildup and joining of manganese steels and carbon steels
Hardness: Up to Rc 54 (3rd pass)No. of Passes: Up to threePolarity: DC ReverseGas: None or 75% Ar, 25% CO2
Typical Applications
• Bucket teeth
• Hammer mill and mill swing hammers
• Tampers and jackhammers
• Impactor crusher bars
Usage ProcedureWhen CRONALLOY EAGLE 7109M-FC is applied via the open arc method, high deposition rates are possible. Weld current of 28-30V/250A will give a deposition of approximately 12lbs./hr.DC current, reverse polarity is preferred for better arc stability. For general hardfacing, wire stickout may vary from 3/4" to 1-1/2". On low current applications (175 – 240 amps), approximately 1" stickout should be maintained.The hardness figures shown are typical, and variations, higher or lowe

Read More
Usually Ships: Today
While Supplies Last

Frequently Bought Together

DV_ZoomOriginal_I_CS1065.jpg

711 Carbide Hard Facing Stick Rod Electrode 5/32"

Item#: CS1065
DV_ZoomOriginal_I_P12036.jpg

281 Martensitic Stick Rod Electrode 1/8"

Item#: P12036
DV_ZoomOriginal_I_CW1916.jpg

7350 Carbide Hard Facing Stick Rod Electrode 1/4"

Item#: CW1916
DV_ZoomOriginal_P_WDPMP1065.jpg

194 High Impact Manganese Steel Alloy 5/32

Item#: EG19430000
DV_ZoomOriginal_I_EG67280045.jpg

672 Extreme Impact And Abrasion Resistant Flux Cored Alloy .045X25LB

Item#: EG67280045
DV_ZoomOriginal_P_WDPMP1065.jpg

194 High Impact Manganese Steel Alloy 3/32

Item#: EG19450000
DV_ZoomOriginal_I_KT13527.jpg

Front Bumper Trim Panel/Running Board Split Rivet

Item#: KT13527
DV_ZoomOriginal_I_KT13321.jpg

Front/Rear Bumper Push-Type Retainer Nylon 20mm

Item#: KT13321
DV_ZoomOriginal_I_KT12848.jpg

Bumper Clip Push-Type Retainer Nylon 18mm

Item#: KT12848
DV_ZoomOriginal_I_CW3054.jpg

Large MIG Plier

Item#: CW3054
DV_ZoomOriginal_I_CW4015.jpg

11-35 MIG Welding Contact Tip 0.035"

Item#: CW4015
DV_ZoomOriginal_P_WDPMP1111.jpg

Er70S-6 Mild/Carbon Steel Mig Welding Wire 0.035

Item#: EG6108S635
DV_ZoomOriginal_I_DY89320212.jpg

Universal Socket Set, SAE, 1/2" Drive, 6pc

Item#: DY89320212
DV_ZoomOriginal_P_27342.jpg

Acid Brush 1/2 x 5-3/4"

Item#: KT14036
DV_ZoomOriginal_I_DY80000351.jpg

Pneumatic Impact Wrench, 1/2 Drive Max Torque 730 lbs

Item#: DY80000351
DV_ZoomOriginal_I_DY89320212.jpg

Universal Socket Set, SAE, 1/2" Drive, 6pc

Item#: DY89320212
DV_ZoomOriginal_P_27342.jpg

Acid Brush 1/2 x 5-3/4"

Item#: KT14036
DV_ZoomOriginal_I_DY80000351.jpg

Pneumatic Impact Wrench, 1/2 Drive Max Torque 730 lbs

Item#: DY80000351

Product Description

Designed for low abrasion resistance and high impact situations.
Superior Advantages
• Work hardens under heavy impact conditions
• Unlimited pass-over-pass applications
• High operator appeal – smooth running, quiet and minimal sparks
Buildup and joining of manganese steels and carbon steels
Hardness: Up to Rc 54 (3rd pass)No. of Passes: Up to threePolarity: DC ReverseGas: None or 75% Ar, 25% CO2
Typical Applications
• Bucket teeth
• Hammer mill and mill swing hammers
• Tampers and jackhammers
• Impactor crusher bars
Usage ProcedureWhen CRONALLOY EAGLE 7109M-FC is applied via the open arc method, high deposition rates are possible. Weld current of 28-30V/250A will give a deposition of approximately 12lbs./hr.DC current, reverse polarity is preferred for better arc stability. For general hardfacing, wire stickout may vary from 3/4" to 1-1/2". On low current applications (175 – 240 amps), approximately 1" stickout should be maintained.The hardness figures shown are typical, and variations, higher or lowe

Technical Specifications

Item#: CW3587
Welding Process MIG
Type Flux Cored
Diameter .045 "
Base Metal Austenitic
Hardness 45-54 (WH) HRC
Shielding Gas No Gas
Polarity DCRP
UNSPSC #: 23271810
TAA Compliant: Yes
Weight: 27.5 lb

Product Restrictions

Your Recently Viewed Items