7370 Carbide Hard Facing Stick Rod Electrode 3/8"
(Pack of
25.0)
Designed for high abrasion resistance in low to moderate impact situations.
Superior Advantages
• Minimal base metal dilution
• Maximum recovery (95% versus 65% typical)
• 1/4" dia. provides good out-of-position welding
• Good edge control
Corrosion-resistant stabilized chrome carbide
Hardness: Rc 64 (2nd pass)Polarity: AC or DC Reverse
Not recommended for manganese steel
Typical Applications
• Dredge pumps
• Screw conveyors
• Chutes for transporting sand and gravel
• Bucket lips
• Skid pads
Usage ProcedureUse AC or DC reverse polarity. Outstanding tribological particle metal transfer allows for both flat and out-of-position welding.
High Abrasion, Moderate Impact Resistance
Technical TipRelief checks are normal. Finish by grinding if necessary.
Frequently Bought Together
671 Impact And Abrasion Resistant Flux Cored Self Sheilded 1/16X25LB
Couldn't load pickup availability
7220 Carbide Hard Facing Stick Rod Electrode 3/8"
Couldn't load pickup availability
711 Carbide Hard Facing Stick Rod Electrode 5/32"
Couldn't load pickup availability
711 Carbide Hard Facing Stick Rod Electrode 1/8"
Couldn't load pickup availability
675 Hi Brade Fc High Abrasion Moderate Impact .035X25LBS
Couldn't load pickup availability
7310 Carbide Hard Facing MIG Welding Wire 1/16"
Couldn't load pickup availability
Quick Seal 2000 Sprayable Seam Sealer Gray
Couldn't load pickup availability
Quick Seal 2000 Sprayable Seam Sealer Beige
Couldn't load pickup availability
Industrial Spray Paint Desert Sand
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Nylon Cable Tie 11-3/4" Black
Couldn't load pickup availability
Flat Soapstone Holder Heavy Duty
Couldn't load pickup availability
1/4 on 1/2 Dimension I Single Pass Overlay
Couldn't load pickup availability
Spring Loaded Trigger Torch Lighter
Couldn't load pickup availability
Product Description
Designed for high abrasion resistance in low to moderate impact situations.Superior Advantages
• Minimal base metal dilution
• Maximum recovery (95% versus 65% typical)
• 1/4" dia. provides good out-of-position welding
• Good edge control
Corrosion-resistant stabilized chrome carbide
Hardness: Rc 64 (2nd pass)Polarity: AC or DC Reverse
Not recommended for manganese steel
Typical Applications
• Dredge pumps
• Screw conveyors
• Chutes for transporting sand and gravel
• Bucket lips
• Skid pads
Usage ProcedureUse AC or DC reverse polarity. Outstanding tribological particle metal transfer allows for both flat and out-of-position welding.
High Abrasion, Moderate Impact Resistance
Technical TipRelief checks are normal. Finish by grinding if necessary.
Technical Specifications
| Item#: | CW1919 |
|---|---|
| Welding Process | Stick |
| Type | Tubular |
| Diameter | 3/8 " |
| Length | 18 " |
| Base Metal | Carbide |
| Carbide Type | Corrosion Resistant Complex |
| Hardness | 61-64 HRC |
| Polarity | AC/DCRP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 24.0 lb |
Product Restrictions
