Band-It Clamp High-Carbon Steel 4-1/2 x 5/8"
(Pack of
10.0)
Made of high-carbon electrolytic galvanized steel to resist corrosion 1/32" thick band
Designed for industrial and production equipment
1. Insert clamp in tool, then insert wrench assembly. If you prefer, install wrench assembly before clamp is inserted.2. Start pumping ratchet wrench forward until proper tension has been applied.3. Place punch on clamp buckle and, while holding tension with ratchet wrench, lock clamp by striking punch with hammer until clamp is tight.4. While holding tension with wrench, swing tool up against buckle, then backward to break off clamp tail. To loosen clamp tail, wind until tail is free. Remove mandrel-wrench assembly.
Frequently Bought Together

Slotted Hex Head Hose Clamp 301 SS 3/4 to 1-3/4"
Couldn't load pickup availability

Slotted Hex Head Hose Clamp 1-5/16 to 2-1/4"
Couldn't load pickup availability

Slotted Hex Head Hose Clamp 301 SS 3/8 to 7/8"
Couldn't load pickup availability

Vacuum Hose Connector 1/8 x 1/8"
Couldn't load pickup availability

DOT Compression Elbow Male 90° Brass 3/8 x 1/8"
Couldn't load pickup availability

Hose Clamp 301 SS 1-13/16 to 2-3/4"
Couldn't load pickup availability

Slotted Hex Head Hose Clamp 301 SS 3/4 to 1-3/4"
Couldn't load pickup availability

Slotted Hex Head Hose Clamp 1-5/16 to 2-1/4"
Couldn't load pickup availability

Slotted Hex Head Hose Clamp 301 SS 3/8 to 7/8"
Couldn't load pickup availability

Worm Gear Hose Clamp Assortment with Rack
Couldn't load pickup availability

FLEXAIR 3/8" I.D. x 25' air hose
Couldn't load pickup availability

Slotted Hex Head Hose Clamp 301 SS 7/16 to 1"
Couldn't load pickup availability

Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability

Inner Fender Shield Attaching Clip Nylon Black
Couldn't load pickup availability

Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Product Description
Made of high-carbon electrolytic galvanized steel to resist corrosion 1/32" thick band Designed for industrial and production equipment
1. Insert clamp in tool, then insert wrench assembly. If you prefer, install wrench assembly before clamp is inserted.2. Start pumping ratchet wrench forward until proper tension has been applied.3. Place punch on clamp buckle and, while holding tension with ratchet wrench, lock clamp by striking punch with hammer until clamp is tight.4. While holding tension with wrench, swing tool up against buckle, then backward to break off clamp tail. To loosen clamp tail, wind until tail is free. Remove mandrel-wrench assembly.
Technical Specifications
Item#: | 81802 |
---|---|
Category | Band-It Clamp |
Material | Galvanized High-Carbon Steel |
Size | 4-1/2 " |
I.D. | 4-1/2 " |
Minimum Diameter | 4-1/2 " |
Band Width | 5/8 " |
Width | 5/8 " |
Thickness | 1/32 " |
UNSPSC #: | 31162906 |
TAA Compliant: | Yes |
Weight: | 1.9 lb |
Product Restrictions





