Countersink for Chamfering or Deburring, 82° Single End Single Flute, 1/4 to 3/4" Screws, 1-1/2 x 3-1/2"
(Pack of
1)
SKU:97976 Item#: 97976
• 82° included angle
• Single cutting edge provides fast stock removal; finishes chatter-free
• Finish reduces chip build-up on cutting edge
• Recommended RPM is half the nominal drilling speed
• Designed for general-purpose countersinking, chamfering or deburring
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Chatterless Countersink 82° Six Flute 5/8"
Couldn't load pickup availability
Cryocut 5/8" Body Dia. 82o Angle Countersink, 3-Flute
Couldn't load pickup availability
Cryocut 3/4" Body Dia. 82o Angle Countersink, 3-Flute
Couldn't load pickup availability
Cryocut 1/2" Body Dia. 100o Angle Countersink, 3-Flute
Couldn't load pickup availability
Cryocut 5/8" Body Dia. 100o Angle Countersink, 3-Flute
Couldn't load pickup availability
Cryocut 3/16" Body Dia. 100o Angle Countersink, 1-Flute
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/8"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 1/4" (M6)
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3/8" (M10)
Couldn't load pickup availability
Bumper and Wheel Well Liner Push-Type Retainer
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/8"
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 1/4" (M6)
Couldn't load pickup availability
Product Description
• 82° included angle• Single cutting edge provides fast stock removal; finishes chatter-free
• Finish reduces chip build-up on cutting edge
• Recommended RPM is half the nominal drilling speed
• Designed for general-purpose countersinking, chamfering or deburring
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 97976 |
|---|---|
| Type | Countersink |
| Body Diameter | 1-1/2 " |
| Flutes | Single |
| Included Angle | 82 ° |
| Shank Size | 1/2 " |
| Overall Length | 3-1/2 " |
| For Screw Size | 1/4" - 3/4 " |
| Cutting Diameter Min. | 0.50 " |
| Cutting Diameter Max. | 1.46 " |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.46 lb |
Product Restrictions
