DOT Compression Elbow Male 90° Brass 3/4 x 1/2"
(Pack of
2.0)
Easily tackle piping challenges with a durable and reliable brass compression elbow. Designed to join pipes at a 90-degree angle, this PTC fitting provides a seamless solution for changing pipe direction, even in areas where soldering is impractical or unsafe. The compression system—using ferrules and nuts—ensures a secure, leak-resistant connection without the need for welding or soldering. Crafted from corrosion-resistant brass, it offers long-lasting strength and cost-effectiveness, making it an ideal choice for plumbers, contractors, and industrial applications involving water or fluid systems.
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Frequently Bought Together
DOT Compression Elbow Male 45° Brass 3/8 x 1/8"
Couldn't load pickup availability
Parker DOT Compression - Nylon Union Elbow 1/4x1/4
Couldn't load pickup availability
Parker DOT Compression - Nylon Male Branch Tee 1/4x1/4x1/4
Couldn't load pickup availability
DOT Compression Run Tee Male 3/8 x 3/8 x 3/8"
Couldn't load pickup availability
DOT Compression Connector Female Brass 3/8 x 1/4"
Couldn't load pickup availability
DOT Compression Connector Male Brass 3/8 x 1/2"
Couldn't load pickup availability
Parker DOT Compression - Nylon Tubing Union 1/4x1/4
Couldn't load pickup availability
H353H Truck Hose 1-15/64" OD x 50'
Couldn't load pickup availability
Parker DOT Compression - Nylon Male Branch Tee 3/8x1/4x1/4
Couldn't load pickup availability
Push-Button Air Coupler Plug Steel 1/4" x 1/4-18
Couldn't load pickup availability
Hose End Brass 3/8 x 3/8"
Couldn't load pickup availability
Ergonomic Blowgun 1/4"
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 2CP
Couldn't load pickup availability
Wheel Flare Molding Clip with Sealer Nylon
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/8"
Couldn't load pickup availability
Product Description
Easily tackle piping challenges with a durable and reliable brass compression elbow. Designed to join pipes at a 90-degree angle, this PTC fitting provides a seamless solution for changing pipe direction, even in areas where soldering is impractical or unsafe. The compression system—using ferrules and nuts—ensures a secure, leak-resistant connection without the need for welding or soldering. Crafted from corrosion-resistant brass, it offers long-lasting strength and cost-effectiveness, making it an ideal choice for plumbers, contractors, and industrial applications involving water or fluid systems.• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
| Item#: | 96883 |
|---|---|
| Class | Air Brake Ftgs/Tubing/Accessories |
| Fitting Type | Compression - Nylon |
| Style | DOT |
| Material | Brass |
| Configuration | Male Elbow 90 Degrees |
| Connection Type A x B | Tube x Pipe |
| Fitting Dimension A | 3/4 " |
| Fitting Dimension B | 1/2-14 |
| Size | 3/4TX1/2P |
| UNSPSC #: | 25171700 |
| TAA Compliant: | No |
| Weight: | 0.78 lb |
Product Restrictions
