Combination Drill-Tap, M1 High Speed Steel, 118° Split Point, 1/4"-28, 0.63" Tap Length, 3.25" Overall Length
(Pack of
1)
SKU:59928 Item#: 59928
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
HSS Combination Drill-Tap M5
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap 3/8-16
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap M6 x 1
$0.00
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
$0.00
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3" (M10)
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap M14 x 2
$0.00
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap M4 x 0.7
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap M12 x 1.75
$0.00
Couldn't load pickup availability
Small Index-Tend Pry Bar
$0.00
Couldn't load pickup availability
Comfort Grip Ergonomic Jumbo Awl, 4 pc Hook & Pick Set
$0.00
Couldn't load pickup availability
9" Hi-Level Heavy-Duty Power Jaw Plier-Cutter
$0.00
Couldn't load pickup availability
Product Description
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 59928 |
|---|---|
| Type | Combination Drill Tap |
| Point | 118° Split |
| Diameter | 1/4 " |
| Pitch | 28 |
| Tap Length | 0.6300 " |
| Material Thickness | 1/2 " |
| Material | HSS |
| Overall Length | 3.25 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
