Combination Drill-Tap, M1 High Speed Steel, 118° Split Point, M7-1, 0.69" Tap Length, 3.69" Overall Length
(Pack of
1)
SKU:27382 Item#: 27382
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
HSS Combination Drill-Tap 10-32
Couldn't load pickup availability
Cryo-Drap #6-32 Drill & Tap Combo, 135o Split Point, W/Flats
Couldn't load pickup availability
Combination Drill-Tap Set #6 to 1/2"
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 2" Brown
Couldn't load pickup availability
Twist-On Abrasive Disc 3"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 6.5mm
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Shield Push-Type Retainer with Metal Insert
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Blue 17mm
Couldn't load pickup availability
Plug Hand Tap
Couldn't load pickup availability
Bottoming Hand Tap
Couldn't load pickup availability
Plug Hand Tap
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Wire Stripper-Cutter 6" Stainless Steel Jaws
Couldn't load pickup availability
Razor Blade, Single Edge, High Carbon Steel
Couldn't load pickup availability
Product Description
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 27382 |
|---|---|
| Type | Combination Drill Tap |
| Point | 118° Split |
| Diameter | M7 |
| Pitch | 1.0 mm |
| Tap Length | 0.6900 " |
| Material Thickness | 9/16 " |
| Material | HSS |
| Overall Length | 3.69 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.04 lb |
