Large Portable Magnetic Drill, 2HP 120V/10A 1500W Single Phase Motor, 2" Depth of Cut, 2" Diameter
(Pack of
1)
SKU:1574608 Item#: 1574608
• Capacity: 2" x 2"
• Height (maximum): 22-1/4"
• Weight: 34.2 lbs.
• Magnet: 3,035 lbs.
• Variable speed: Reverse function for tapping
• Pressure indicator technology: Visual cues for increasing or decreasing pressure on material
• Reversible handle
• Coolant arbor and 1/2" chuck included
NOTE: Magnet needs a minimum of 3/8" of material for the magnet to hold. Insufficient thickness will cause the magnet to lose hold and the system will not allow the motor to start.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Annular Cutter
Couldn't load pickup availability
Annular Cutter
Couldn't load pickup availability
High-Performance M2-AL Annular Cutter 1-15/16"
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 3/16"
Couldn't load pickup availability
Portable Magnetic Drill 1-1/2"
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
Couldn't load pickup availability
Drive Rivet Nylon M8
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
18" Locking Smooth Operator Clamp
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3/8" (M10)
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
Product Description
• Capacity: 2" x 2"• Height (maximum): 22-1/4"
• Weight: 34.2 lbs.
• Magnet: 3,035 lbs.
• Variable speed: Reverse function for tapping
• Pressure indicator technology: Visual cues for increasing or decreasing pressure on material
• Reversible handle
• Coolant arbor and 1/2" chuck included
NOTE: Magnet needs a minimum of 3/8" of material for the magnet to hold. Insufficient thickness will cause the magnet to lose hold and the system will not allow the motor to start.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 1574608 |
|---|---|
| Height | 22-1/4" maximum; 17-9/16" minimum |
| Width | 7-43/64 " |
| Length | 12-13/32 " |
| Magnetic Dead Lift | 3,370 |
| Motor | 2 hp 120V 10A 1500W (single phase) |
| Arbor Bore | 3/4 " |
| Cutter Diameter | 2 " |
| Depth of Cut | 2 " |
| Drill Point Breakaway | 3035 |
| Magnetic Base | 7-7/8" X "3-7/8" X"1.5" |
| Centerline Pilot to Motor Face | 2-1/4 " |
| Centerline Pilot to Magnet Face | 2-3/64 " |
| UNSPSC #: | 23241801 |
| TAA Compliant: | Yes |
