Turnbuckle, Eye and Eye, Galvanized, 3/4" x 12"
(Pack of
1)
SKU:1442464 Item#: 1442464
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Eye Bolt with Nut, Stainless Steel, 1/4"-20, 500 lb WLL
$0.00
Couldn't load pickup availability
Eye Bolt with Nut 5/8" x 6" Long
$0.00
Couldn't load pickup availability
Shoulder Eye Bolt with Nut, Stainless Steel, 1/2"-13, 2,150 lb WLL
$0.00
Couldn't load pickup availability
Shelf Bin, Yellow, 17-7/8" x 6-5/8" x 4"
$0.00
Couldn't load pickup availability
ShelfMaxâ„¢ Bin, Blue, 11-5/8" x 6-5/8" x 6"
$0.00
Couldn't load pickup availability
ShelfMaxâ„¢ Bin, Blue, 11-5/8" x 8-3/8" x 6"
$0.00
Couldn't load pickup availability
Fender and Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
$0.00
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Blue 17mm
$0.00
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Jaw and Jaw, 1/2" x 6.00" Take Up
$0.00
Couldn't load pickup availability
Turnbuckle, Jaw and Eye, Galvanized, 1/2" x 2"
$0.00
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Hook and Hook, 1/4" x 4.00" Take Up
$0.00
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442464 |
|---|---|
| Manufacturer Model #: | 01304 8 |
| Type | Eye and Eye |
| Diameter | 3/4 " |
| Closed Length | 21-3/4 " |
| Working Load Limit | 5,200 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
