Turnbuckles Eye and Eye, 800 Lb Safe Load, 5/16 x 4-1/2" Takeup
(Pack of
4)
SKU:14425 Item#: 14425
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Swivel Eye Bolt Snap, 3/8" Eye Size, 2-15/16" Length, Zinc Finish
$0.00
Couldn't load pickup availability
Turned Eyebolt, Zinc-Plated, 3/8" x 1"
$0.00
Couldn't load pickup availability
Oversize Screw Pin Anchor Shackle, Stainless Steel, 3/8", 2,000 lb WLL
$0.00
Couldn't load pickup availability
Swivel Eye Bolt Snap, 3/8" Eye Size, 2-15/16" Length, Zinc Finish
$0.00
Couldn't load pickup availability
Rope Ratchet 150 Lb Safe Load 1/4" x 10'
$0.00
Couldn't load pickup availability
Caster Swivel with Brake Polyurethane Wheel
$0.00
Couldn't load pickup availability
Rear Bumper Cover Retainer Plastic 18mm
$0.00
Couldn't load pickup availability
Bumper and Wheel Well Liner Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
$0.00
Couldn't load pickup availability
Turnbuckle, Aluminum, Hook and Hook, 1/4" x 2.04" Take Up
$0.00
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Jaw and Jaw, 3/8" x 6.00" Take Up
$0.00
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 5/8" x 12"
$0.00
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 14425 |
|---|---|
| Type | Eye and Eye |
| Diameter | 5/16 " |
| Working Load Limit | 800 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
| Weight: | 1.92 lb |
