Wedge Type Anchor Bolt, Steel, Zinc Finish, 1/4 x 3"
(Pack of
25)
SKU:92854 Item#: 92854
• Zinc-plated, rust-resistant steel
• Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
• Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Frequently Bought Together
Lag Screw Shield Anchor Long Style 3/8 x 2-1/2"
$0.00
Couldn't load pickup availability
Double Expansion Shield Anchor Alloy Steel 5/8"
$0.00
Couldn't load pickup availability
Masonry Sleeve Anchor Steel 1/4 x 2-1/4"
$0.00
Couldn't load pickup availability
Hex Cap Screw Property Class 8.8 M6-1 x 16mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
$0.00
Couldn't load pickup availability
Wedge Type Anchor Bolt Steel 3/8 x 2-3/4"
$0.00
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 1/4 x 1-3/4"
$0.00
Couldn't load pickup availability
Wedge Type Anchor Bolt Steel 3/4 x 4"
$0.00
Couldn't load pickup availability
Product Description
• Zinc-plated, rust-resistant steel• Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
• Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Technical Specifications
| Item#: | 92854 |
|---|---|
| Manufacturer Model #: | 1430 |
| Diameter | 1/4 " |
| Length | 3 " |
| Thread Length | 1/2 " |
| Drill Size | 1/4 " |
| Material | Carbon Steel |
| Finish | Bright Zinc |
| Type | Wedge Anchor |
| Size | 1/4X3 " |
| Minimum Embedment | 1 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.125 lb |
