Wedge Type Stud Bolt Anchor, Stainless Steel, Plain Finish, 5/8 x 3-1/2"
(Pack of
5)
SKU:91633 Item#: 91633
• Available in zinc-plated steel and stainless steel
1. Drill hole of proper diameter in concrete. Drilled hole can be any depth beyond minimum recommended depth.
2. Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture.
3. Tighten nut until wrench resistance is felt (approximately three to four full turns past the hand-tight position). Anchoring is now complete.
Frequently Bought Together
Light-Medium Duty Anchor Assortment 555Pcs
$0.00
Couldn't load pickup availability
1/2x2-1/2 Mas-Tap Hd Anchor
$0.00
Couldn't load pickup availability
Masonry Anchor Phillips Head #14-10 x 2-3/4"
$0.00
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1"
$0.00
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
$0.00
Couldn't load pickup availability
DIN 9021B Fender Washer Low Carbon Steel 18mm
$0.00
Couldn't load pickup availability
Nylon Cable Tie 15-1/4" Black
$0.00
Couldn't load pickup availability
Rocker Door and Exterior Molding Retainer
$0.00
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 10mm
$0.00
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor SS 1/2 x 3-3/4"
$0.00
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor SS 3/8 x 2-1/4"
$0.00
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor SS 1/2 x 4-1/4"
$0.00
Couldn't load pickup availability
Product Description
• Available in zinc-plated steel and stainless steel1. Drill hole of proper diameter in concrete. Drilled hole can be any depth beyond minimum recommended depth.
2. Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture.
3. Tighten nut until wrench resistance is felt (approximately three to four full turns past the hand-tight position). Anchoring is now complete.
Technical Specifications
| Item#: | 91633 |
|---|---|
| Diameter | 5/8 " |
| Length | 3-1/2 " |
| Thread Length | 1-1/2 " |
| Drill Size | 5/8 " |
| Material | Stainless Steel |
| Finish | Plain |
| Type | Wedge Anchor |
| Proof Test Load | 4,800 lb |
| Length Identification Code | D |
| Size | 5/8X3-1/2 " |
| Minimum Embedment | 2-5/8 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.89 lb |
