Turnbuckles Eye and Eye, 800 Lb Safe Load, 5/16 x 4-1/2" Takeup
(Pack of
4)
SKU:14425 Item#: 14425
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Frequently Bought Together
Eyebolt, With Nut, Galvanized, 1/2" x 8"
$0.00
Couldn't load pickup availability
Turned Eyebolt, Stainless Steel, 3/8" x 4"
$0.00
Couldn't load pickup availability
Turned Eyebolt, Zinc-Plated, 3/8" x 3-1/2"
$0.00
Couldn't load pickup availability
4ft Fiberglass Stepladder 7404
$0.00
Couldn't load pickup availability
8f Fiberglass Twin Ladder T6308
$0.00
Couldn't load pickup availability
8ft Fiberglass Twin Ladder T7408
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 15mm
$0.00
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
$0.00
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
$0.00
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 1" x 6"
$0.00
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 1/2" x 6"
$0.00
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 7/8" x 12"
$0.00
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 14425 |
|---|---|
| Type | Eye and Eye |
| Diameter | 5/16 " |
| Working Load Limit | 800 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
| Weight: | 1.92 lb |
