133 Econo-Cast Wear Resistant Cast Electrode 5/32
(Pack of
5)
An all-position, non-machinable cast iron electrode designed for welding contaminated cast irons.
• Produces wear-resistant over-lays on cast iron
• Excellent for repairing slurry pumps and cast iron subjected to wear
• Produces sound, porosity-free welds even on dirty, greasy, contaminated cast iron
• Economical – Costs less than most nickel-based electrodes
• Non-Overheating – Allows use of the whole rod without it turning red, causing the flux to break off
• Nonconductive Flux – Will not side-arc in tight areas
• Can also be used as a base on poor cast iron prior to buildup with X-Ergon Cast-Weld™
• Tensile Strength: 60,000 PSI/414 MPa
• Hardness: 38 Rc
• Machinability: Non-machinable
• Color Match: Excellent, will rust to match cast iron if exposed to the elements
• Current: DC or AC
Frequently Bought Together
270 Cast Iron Stick Rod Electrode 5/32"
Couldn't load pickup availability
270 Cast Iron Stick Rod Electrode 3/32"
Couldn't load pickup availability
270 Cast Iron Stick Rod Electrode 3/16"
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability
High-Tech Seam Sealer Clear 5fl.oz
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Flint For Spring Loaded Trigger Torch Lighter
Couldn't load pickup availability
Cronatron Welding Guide
Couldn't load pickup availability
Heat Stick 400F Degrees
Couldn't load pickup availability
Oxy-Therm Battery 12V
Couldn't load pickup availability
192050 Plasma Cutting Shield Cup
Couldn't load pickup availability
9-6501 Plasma Cutting Tip
Couldn't load pickup availability
Product Description
An all-position, non-machinable cast iron electrode designed for welding contaminated cast irons.• Produces wear-resistant over-lays on cast iron
• Excellent for repairing slurry pumps and cast iron subjected to wear
• Produces sound, porosity-free welds even on dirty, greasy, contaminated cast iron
• Economical – Costs less than most nickel-based electrodes
• Non-Overheating – Allows use of the whole rod without it turning red, causing the flux to break off
• Nonconductive Flux – Will not side-arc in tight areas
• Can also be used as a base on poor cast iron prior to buildup with X-Ergon Cast-Weld™
• Tensile Strength: 60,000 PSI/414 MPa
• Hardness: 38 Rc
• Machinability: Non-machinable
• Color Match: Excellent, will rust to match cast iron if exposed to the elements
• Current: DC or AC
Technical Specifications
| Item#: | EG13330000 |
|---|---|
| Welding Process | Stick Electrode |
| Type | Stick |
| Diameter | 5/32 " |
| Tensile Strength | 60,000 PSI |
| Base Metal | Cast Iron |
| Hardness | 38 HRC |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 6.08 lb |
