Band-It Clamp Basic Ratchet Tool 3/8-5/8 9-3/4"
(Pack of
1)
1. Insert clamp in tool, then insert wrench assembly. If you prefer, install wrench assembly before clamp is inserted.2. Start pumping ratchet wrench forward until proper tension has been applied.3. Place punch on clamp buckle and, while holding tension with ratchet wrench, lock clamp by striking punch with hammer until clamp is tight.4. While holding tension with wrench, swing tool up against buckle, then backward to break off clamp tail. To loosen clamp tail, wind until tail is free. Remove mandrel-wrench assembly.
Frequently Bought Together

Hose Clamp 301 SS 2-13/16 to 3-3/4"
Couldn't load pickup availability

Band-It Clamp High-Carbon Steel 5 x 5/8"
Couldn't load pickup availability

Hose Clamp 301 SS 1-1/16 to 2"
Couldn't load pickup availability

Vacuum Hose Connector Straight 3/16 x 3/16"
Couldn't load pickup availability

Norma Torro European Hose Clamp 3/8 to 5/8"
Couldn't load pickup availability

DOT Swivel Elbow Male 360° Brass 3/8 x 1/4-18
Couldn't load pickup availability

H56908
Couldn't load pickup availability

H353H Truck Hose 33/64" OD x 250'
Couldn't load pickup availability

Silicone Heater/Coolant Hose Clamp SS 2-1/16 to 3"
Couldn't load pickup availability

Miniature Clamp SS 5/16 to 7/8"
Couldn't load pickup availability

Universal Vacuum Hose Connector 3/16"
Couldn't load pickup availability

Hose Clamp 301 SS 9/16 to 1-1/4"
Couldn't load pickup availability

Wheel House Molding Split Rivet Aluminum 3/16"
Couldn't load pickup availability

Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability

Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Product Description
1. Insert clamp in tool, then insert wrench assembly. If you prefer, install wrench assembly before clamp is inserted.2. Start pumping ratchet wrench forward until proper tension has been applied.3. Place punch on clamp buckle and, while holding tension with ratchet wrench, lock clamp by striking punch with hammer until clamp is tight.4. While holding tension with wrench, swing tool up against buckle, then backward to break off clamp tail. To loosen clamp tail, wind until tail is free. Remove mandrel-wrench assembly.Technical Specifications
Item#: | 81197 |
---|---|
Category | Band-It Clamp |
SAE Size | 3/8-5/8 |
Material | Basic Ratchet Tool |
Description | Form-Seal Tool |
Size | 3/8-5/8 " |
Length | 9-3/4 " |
UNSPSC #: | 31162906 |
TAA Compliant: | Yes |
Weight: | 0.96 lb |
Product Restrictions
