Hollow Wall Screw Anchor, Steel, Zinc Finish, Long Style, 5/16" Drill Size, #6-32
(Pack of
100)
• Zinc rust-resistant finish
1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Frequently Bought Together
Conical Screw Anchor Kit Plastic 201Pcs
Item#: 90762
Couldn't load pickup availability
Drill 'N Drive Masonry Anchor Kit 102Pcs
Item#: 90896
Couldn't load pickup availability
Self-Drilling Wallboard Mini Anchor Kit 51Pcs
Item#: 27821
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 20mm
Item#: 28680
Couldn't load pickup availability
Hex Flange Nut Grade 10 Steel M10-1.5
Item#: 59769
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M8
Item#: 80263
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Item#: KT13527
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
Item#: 1468633
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Item#: P15600
Couldn't load pickup availability
Toggle Bolt Anchor Wing #6-32
Item#: 90978
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel 3/8-16 x 6"
Item#: 25160
Couldn't load pickup availability
Tubular Anchor Plastic Blue #13 to #15
Item#: 25118
Couldn't load pickup availability
Product Description
• Zinc rust-resistant finish1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 25171 |
|---|---|
| Length | 2-1/16 " |
| Type | Wall Anchor |
| Body Diameter | 7/32 " |
| Diameter | 1/8 " |
| Material | Steel |
| Screw Diameter | 6-32 (1/8) Long |
| Finish | Zinc |
| Drill Size | 5/16 " |
| Anchor Size | 1/8 x 2-1/16 " |
| Minimum Wall Thickness | 5/8 " |
| Maximum Wall Thickness | 1 " |
| Screw Length | 2 " |
| Wall Thickness | 5/8 to 1-1/4 " |
| Sleeve Length | 27/32 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 1.91 lb |
Product Restrictions
