Two-Ear Hose Clamp 1.220 to 1.339"
(Pack of
10)
• Medium-pressure clamp, installed on air, fluid, gas and steam lines
• One-piece design offers a positive, tamper-proof seal without damaging the hose
• Assures adequate closure and compensates for tolerance variations in hose sizes
• Zinc-plated steel
• Widely used for maintenance and OEM applications
• Suitable for low-pressure hydraulic use
• Can be used to clamp rubber hose, plastic tubing, rope, coaxial and electrical cable, and more
NOTE: Select nominal size nearest to, but always larger than, O.D. of material to be clamped after fitting has been inserted.
Reference No. is stamped on band of hose clamp.
Frequently Bought Together
Slotted Hex Head Hose Clamp 301 SS 9/16 to 1-1/4"
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 1-5/16 to 2-1/4"
Couldn't load pickup availability
Miniature Clamp SS 7/32 to 5/8"
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 301 SS 9/16 to 1-1/4"
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 1-5/16 to 2-1/4"
Couldn't load pickup availability
Fuel Line Hose 3/8" ID x 25'
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 301 SS 9/16 to 1-1/4"
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 1-5/16 to 2-1/4"
Couldn't load pickup availability
Fuel Line Hose 3/8" ID x 25'
Couldn't load pickup availability
Hose Clamp 301 SS 9/16 to 1-1/16"
Couldn't load pickup availability
FLEXAIR 3/8" I.D. x 25' air hose
Couldn't load pickup availability
FLEXAIR 3/8" I.D. x 50' air hose assembly w/ Industrial safety coupler
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Product Description
• Medium-pressure clamp, installed on air, fluid, gas and steam lines• One-piece design offers a positive, tamper-proof seal without damaging the hose
• Assures adequate closure and compensates for tolerance variations in hose sizes
• Zinc-plated steel
• Widely used for maintenance and OEM applications
• Suitable for low-pressure hydraulic use
• Can be used to clamp rubber hose, plastic tubing, rope, coaxial and electrical cable, and more
NOTE: Select nominal size nearest to, but always larger than, O.D. of material to be clamped after fitting has been inserted.
Reference No. is stamped on band of hose clamp.
Technical Specifications
| Item#: | 96643 |
|---|---|
| Category | Two-Ear Hose Clamps |
| Applications | Medium Pressure Applications |
| SAE Size | 34 |
| Material | Zinc Plated Steel |
| Size | 1-5/16 " |
| Minimum Diameter | 1.220 " |
| Maximum Diameter | 1.339 " |
| Width | 0.394 " |
| Thickness | 0.0591 " |
| Inner Width of Ear | 0.2950 " |
| UNSPSC #: | 31162906 |
| TAA Compliant: | Yes |
| Weight: | 0.34 lb |
Product Restrictions
