777 Austenitic High Impact Hard Facing Stick Rod Electrode, 43 to 47 (WH) HRC Hardness, 125 to 170 Amps, AC/DCRP Polarity, 5/32"
(Pack of
5)
SKU:CW1062 Item#: CW1062
Designed for low abrasion resistance and high impact situations.
Superior Advantages
Work hardens under heavy impact conditions
Unlimited pass-over-pass applications
High operator appeal smooth running, quiet and minimal sparks
For severe impact and extreme shock (torch cuttable)
Tensile Strength: 116,000 PSI
Hardness: Rc 47
Polarity: AC or DC Reverse
Elongation: 38%
Typical Applications
Bucket teeth
Hammer mill and mill swing hammers
Tampers and jackhammers
Impactor crusher bars
Usage ProcedureUse AC or DC reverse polarity with normal maintenance welding procedures. Surface area should be clean and dry, however, CERTANIUM 777 is manufactured with special cleansing and fluxing agents to promote sound welds under most conditions. For vertical-down welding, hold a short arc and tilt the electrode 10° in the direction of travel, using a stringer bead technique.
Technical TipWhen joining manganese steels, use skip-welding technique to avoid temperature increase in a localized area. Do not preheat manganese steel. Interpass temperature should not exceed 500°F (260°C).
Frequently Bought Together
675 Hi Brade Fc High Abrasion Moderate Impact .045X33LB SELF-SHIELD
$0.00
Couldn't load pickup availability
676 Flux Core Wire Extreme Abrasion Moderate Impact .045X33LBS
$0.00
Couldn't load pickup availability
750 Martensitic Stick Rod Electrode 5/32"
$0.00
Couldn't load pickup availability
173 Multi Purpose High Deposition Alloy For Joining And Build Up 1/8
$0.00
Couldn't load pickup availability
173 Multi Purpose High Deposition Alloy For Joining And Build Up 3/16
$0.00
Couldn't load pickup availability
194 High Impact Manganese Steel Alloy 1/8
$0.00
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Bumper Cover Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Plastic Outside Corner Small Wave Welder Staple
$0.00
Couldn't load pickup availability
Plastic Flat Square Welder Staple
$0.00
Couldn't load pickup availability
106 Mild Steel All Purpose Electrode
$0.00
Couldn't load pickup availability
Product Description
Designed for low abrasion resistance and high impact situations.Superior Advantages
Work hardens under heavy impact conditions
Unlimited pass-over-pass applications
High operator appeal smooth running, quiet and minimal sparks
For severe impact and extreme shock (torch cuttable)
Tensile Strength: 116,000 PSI
Hardness: Rc 47
Polarity: AC or DC Reverse
Elongation: 38%
Typical Applications
Bucket teeth
Hammer mill and mill swing hammers
Tampers and jackhammers
Impactor crusher bars
Usage ProcedureUse AC or DC reverse polarity with normal maintenance welding procedures. Surface area should be clean and dry, however, CERTANIUM 777 is manufactured with special cleansing and fluxing agents to promote sound welds under most conditions. For vertical-down welding, hold a short arc and tilt the electrode 10° in the direction of travel, using a stringer bead technique.
Technical TipWhen joining manganese steels, use skip-welding technique to avoid temperature increase in a localized area. Do not preheat manganese steel. Interpass temperature should not exceed 500°F (260°C).
Technical Specifications
| Item#: | CW1062 |
|---|---|
| Welding Process | Stick |
| Type | Stick Electrode |
| Diameter | 5/32 " |
| Base Metal | Austenitic |
| Hardness | 43-47 (WH) HRC |
| Polarity | AC/DCRP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 5.0 lb |
Product Restrictions
