261 Low Working Temperature Silver Cadium Free Alloy Tensile 60000 32% Elongation 19% Iacs High Silver Content High Detergent Flux
(Pack of
6)
SKU:EG26170000 Item#: EG26170000
A low working temperature silver brazing alloy with superb wetting action on difficult-to-join metals such as tool steels, stainless steel, beryllium copper and nickel alloys.
• Fast Flowing – Works well on tight joints
• High Silver Content – Lower melting point and reduces need for high heat for joining
• High-detergent conductivity
• High strength
• Corrosion resistant
• Cadmium-free
• Joint Strength: Up to 60,000 PSI/414 Mpa
• Elongation: 32%
• Working Temperature: 1370°F/743°C
• Electrical Conductivity: 19% IACS
• Corrosion Resistance: Good
• Coating: Blue
PROCEDURES Clean the weld area. Remove all rust, paint, grease, oil and other foreign matter. Maintain joint clearance of 0.003” to 0.005”. Prefluxing is not required; however, additional flux will help in tight joints and may be needed. Heat the weld area to a dull red color using a slightly carburizing flame. Melt off a small amount of alloy and flux. Keep the torch in motion and flow the deposit through the joint. Allow to cool slowly. Remove flux residue with warm water.
Frequently Bought Together
45 Silver Bare Brazing Rod 1/8"
$0.00
Couldn't load pickup availability
43 High Silver Flux Coated Brazing Rod 1/16"
$0.00
Couldn't load pickup availability
54 Medium Silver Flux Coated Brazing Rod 1/16"
$0.00
Couldn't load pickup availability
Cross-Over Socket Set, Metric, 3/8" Drive, 10pc
$0.00
Couldn't load pickup availability
13-position, Indexable Universal Ergo Hammer
$0.00
Couldn't load pickup availability
10" Dual Jaw Adj and Pipe Wrench
$0.00
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Blue 17mm
$0.00
Couldn't load pickup availability
266 Pink Flux Coated Super Fast Flowing Silver Brasing Alloy 1/16X18
$0.00
Couldn't load pickup availability
264 Bare High Silver Cadium Free Alloy 1/16x18
$0.00
Couldn't load pickup availability
40 High Silver Flux Coated Brazing Rod 1/16"
$0.00
Couldn't load pickup availability
Heat Stick 850F Degrees
$0.00
Couldn't load pickup availability
Cap Whip-Lead Connector #4 to #1
$0.00
Couldn't load pickup availability
Oxygen Safety Cap Heavy Duty
$0.00
Couldn't load pickup availability
Product Description
A low working temperature silver brazing alloy with superb wetting action on difficult-to-join metals such as tool steels, stainless steel, beryllium copper and nickel alloys.• Fast Flowing – Works well on tight joints
• High Silver Content – Lower melting point and reduces need for high heat for joining
• High-detergent conductivity
• High strength
• Corrosion resistant
• Cadmium-free
• Joint Strength: Up to 60,000 PSI/414 Mpa
• Elongation: 32%
• Working Temperature: 1370°F/743°C
• Electrical Conductivity: 19% IACS
• Corrosion Resistance: Good
• Coating: Blue
PROCEDURES Clean the weld area. Remove all rust, paint, grease, oil and other foreign matter. Maintain joint clearance of 0.003” to 0.005”. Prefluxing is not required; however, additional flux will help in tight joints and may be needed. Heat the weld area to a dull red color using a slightly carburizing flame. Melt off a small amount of alloy and flux. Keep the torch in motion and flow the deposit through the joint. Allow to cool slowly. Remove flux residue with warm water.
Technical Specifications
| Item#: | EG26170000 |
|---|---|
| Welding Process | Brazing |
| Type | Flux-Coated Brazing Rod |
| Diameter | 1/16 " |
| Length | 18 " |
| Tensile Strength | 70,000 PSI |
| Melting Temperature | 1,295 °F |
| Color | Blue |
| Base Metal | All Metals Except White Metals |
| Recommended Flux | 361 |
| UNSPSC #: | 23271804 |
| TAA Compliant: | Yes |
| Weight: | 0.395 lb |
Product Restrictions
